Call us
08
Dismantle brake and remove magnet
Electrical and mechanical inspections
Clean magnet pole faces and rotor assembly
Sandblast brake magnets (DE/NDE), bearing housings (DE/NDE), brackets (DE/NDE), rotor drum and main housing/frame
Apply protective coating to all sandblasted areas, excluding magnet pole faces
Repair DE/NDE bearing housings by sleeving
Fit new DE/NDE bearings, grease sleeve seal and seals
Replace corroded bolts as required
Replace heat-shrink lead cable
Supply and install new plug, dowel pin, breather magnet and stopper coupling
Reassemble brake and measure and record air gaps
Painting
